UPS stands for an uninterrupted power supplier. It is a device that supplied temporary power in case of outages. You should use a reliable UPS for your data centres because electricity supply is not stable and various anomalies can interrupt your servers operations.
Why do You Need UPS Systems?
If you don’t use a UPS, processing in your server will instantly shut down at the time of power cut. No data will be saved, and users will also lose access that will wreak havoc on your business. You need a reliable UPS system because:
- Irregular frequency of electricity supply can damage your equipment as they are designed to operate at a particular frequency.
- Wavelength distortion can cause low voltage disturbances that can lead to equipment failure.
- An electric surge can cause a high voltage condition that is also harmful to the functionality of equipment.
Types of UPS
DC Series
- It ensures protection from electric surge, short circuit, overcharge and over discharge battery.
- It is featured with AC indication, battery indication, and fault indication.
- DC Series UPS systems can indicate you about battery mode, battery ageing, battery disconnection, and battery low.
Mini Series
- UPS systems from this series are featured with overcharge and overload protection.
- A low battery will produce a beep in every second. Overload battery will emanate an alarm in every half second.
- Battery replacement alarm will produce a sound in every 2 minutes.
- It is compatible with generator set.
Pro Series
- Advanced battery management
- UPS startup without battery
- High frequency and double conversion online technology
- Optional extension battery pack
- Automatic battery charging in UPS off mode
- Lightning and surge protection
- Short circuit and overload protection
- Wide input voltage range
Pro Plus Series
- N+X parallel redundancy
- Wide input voltage range: 208~478Vac
- Support economic(ECO) operation mode
- Support generator input
- Optimization battery group, the quantity of battery: 16/18/20 pieces (optional)
- High output power factor at 0.9PF
- Online double conversion with DSP control
- Wide input frequency range (50Hz: 45~55Hz / 60Hz: 54~66Hz)
Value Series
- Online-Double conversion
- PFC technology
- ECO function
- Output transfer time is 0ms
- Full digital control (DSP)
- Wide input voltage range: 208~478Vac
- Optimisation battery group, the quantity of battery: 16/18/20 pcs (optional)
If you need a UPS system, you should contact UPS suppliers.